BOSCH Dome IP Camera NDC-265-P

TRONIKA - BOSCH CCTV Camera Security System dome ip cam ndc-255p

The Bosch NDC-265-P 720p IP dome camera is a ready-to-use, complete network video surveillance system inside a compact camera. This camera brings Bosch’s high-performance technology into the realm of small office and retail businesses by offering a cost-effective solution for a broad range of applications. The camera uses H.264 compression technology to give clear images while reducing bandwidth and storage by up to 30%.

Input voltage +12 VDC or
Power-over-Ethernet
Power consumption 4.2 W (max)
Video
Sensor type ¼-inch CMOS
Sensor pixels 1280 x 800
Sensitivity 1.0 lx
Video resolution 720p, 4CIF/D1, VGA, CIF, QVGA
Video compression H.264 MP (Main Profile); H.264 BP+ (Baseline Profile
Plus); M-JPEG
Max. frame rate 30 fps (M-JPEG frame rate can vary depending on system
loading)
Lens
Lens type Varifocal 2.7 to 9 mm, DC Iris F1.2 to close
Lens mount Board mounted
Connection
Analog video out 2.5 mm jack for installation only
Alarm input Short or DC 5V activation
Relay out Input rating Maximum 1 A 24 VAC/VDC
Audio
Audio input Built-in microphone
Line in jack connector
Audio output Line out jack connector
Audio communication Two-way, full duplex
Audio compression G.711, L16 (live and recording)
Local Storage
Memory card slot Supports up to 32 GB microSD/SDHC card
(An SD card of Class 4 or higher is recommended for
HD recording)
Recording Continuous recording, ring recording. alarm/events/schedule
Unit configuration Via web browser or PC surveillance software
Network
Protocols HTTP, HTTPs, SSL, TCP, UDP, ICMP, RTSP, RTP, Telnet,
IGMPv2/v3, SMTP, SNTP, FTP, DHCP client, ARP,
DNS, DDNS, NTP, SNMP, UPnP, 802.1X, iSCSI
Ethernet 10/100 Base-T, auto-sensing, half/full duplex, RJ45
PoE IEEE 802.3af compliant
Mechanical
Dimensions Dia